Small type wax powder making tank
Wax powder making machine milling drum can make liquid wax into powder wax.And the material we use is stainless steel ,so can be used for producing paraffin ,palm wax and stearic acid. Milling drum can be used by areas with different temperature, taking less space and easy operating are its characteristics.
- GAOWAX
- China
- 15~30days
- 50 Sets per Month
- Information
wax powder making tank is a device that converts paraffin into granular substances. It has the advantages of high efficiency, high precision, good stability, low energy consumption, and environmental protection. It is widely used in industrial production.
Size | 150L |
Capacity | 150L/hour |
Powder | Three phase 380V |
Supply | 6Kw |
wax powder making tank :
1 .When installing the equipment, it should possess the fine grounding device and it should frequently examine the grounding to avoid the electric shock accidence.
2. When shutting down the equipment, open the valve in both ends of the nozzle and discharge the remained candle liquid.
3. When shutting down the equipment, it should timely examine the fastening screw of the big and small vibrating trough whether it is loosened. If it is loosened, it should timely screw it up to avoid the failure.
4. It should regularly examine the height of the heating oil level to avoid impacts on the heating effect.
5. After 50 to 60 hours of the first running, the reducer should replace the lubricating oil and then it should be done once per three months. In the meanwhile, it should and clean the candle powder on the wind wheel that back of the motor.
6. When replacing the candle liquid trough electric heater, it should firstly open the oil outlet valve and discharge the heating oil. After replacing it, it should close the oil outlet valve and inject the heating oil newly.
7. The operation site should be dust-free, corrosive gas and liquid-free and floating mental particles-free and electromagnetic interference-free, far away from the interference source to avoid the impacts on the normal operation of the transducer in the electrical appliance control.
